Products
0.5scfm Vacuum Generator
$40.00 USD
A replaceable vacuum generator found on our Platen and Belt systems
1.2scfm Vacuum Generator
$100.00 USD
A replaceable vacuum generator found in our Paper and pick systems
1/4" NPT x 1/4" PTC Air Flow Control Elbow
$40.00 USD
Flow Control Valve used on the air distribution manifold found inside the base of the machine
10mm Flanged Linear Bearing
$7.00 USD
A replaceable bearing used in our Pick assembly
11mm Silicone Vacuum Cup w/M5 Barb
$10.00 USD
A replaceable vacuum cup used in our Belt system
12mm Carriage Linear Bearing
$70.00 USD
A bearing used in our Platen system
12mm Flanged Linear Bearing
$20.00 USD
A bearing used in our Dispenser system
22mm Flanged Ball Bearing
$4.00 USD
A bearing used in our Tensioner system
2mm Pitch Platen Drive Belt
$30.00 USD
The belt that connects the dynamic platen to the platen motor. A Legacy belt used to drive the platen motor Pre HW 3.3
2mm Pitch Platen Drive Pulley
$5.00 USD
A Legacy pulley used in the platen drive system Pre HW 3.3
30k 7mm M/W Style Crutches
$600.00 USD
A box of 30,000 7mm crutches with an internal shape of M/W
30k 8mm M/W Style Crutches
$600.00 USD
A box of 30,000 8mm crutches with an internal shape of M/W
3mm Pitch Platen Drive Belt
$50.00 USD
3mm pitch belt for the dynamic platen
3mm Pitch Platen Drive Pulley
$30.00 USD
A Platen drive pulley used in our HW 3.3+ machines
5/2 Pneumatic Solenoid Valve 24V
$40.00 USD
A pneumatic solenoid valve used on the air distribution manifold found inside the base of the machine
Acrylic Clean Up Tray
$25.00 USD
Acrylic collection tray. 1 is shipped with the machine, This can be a replacement or additional.
Back Crutch Shooter Assembly
$2,000.00 USD
– Sold OutA complete Back Crutch shooter assembly. Please confirm Front or Back before order
Belt Vacuum Assembly
$750.00 USD
This assembly is found beneath the platen and is used to secure the belt before the roll cycle begins.
Bobbin Holder Assembly
$900.00 USD
– Sold OutThis assembly holds the paper bobbin in its track to feed into the machine. *PAPER BOBBIN NOT INCLUDED*
Bobbin Holder Bushing
$7.50 USD
These bushings create a smooth surface for the Paper Bobbin assembly to roll on
Calibrated Stepper Driver (A) Assembly
$100.00 USD
A pre calibrated driver. This is now a Legacy part. PLEASE CONFIRM COMPATIBILITY BEFORE ORDER
Calibrated Stepper Driver (X) Assembly
$100.00 USD
A pre calibrated driver. This is now a Legacy part. PLEASE CONFIRM COMPATIBILITY BEFORE ORDER
Calibrated Stepper Driver (Y) Assembly
$100.00 USD
A pre calibrated driver. This is now a Legacy part. PLEASE CONFIRM COMPATIBILITY BEFORE ORDER
Calibrated Stepper Driver (Z) Assembly
$100.00 USD
A pre calibrated driver. This is now a Legacy part. PLEASE CONFIRM COMPATIBILITY BEFORE ORDER
Catcher Motor Assembly
$110.00 USD
A catcher motor replacement for the Catcher Assembly
Catcher Sensor Assembly
$60.00 USD
The catcher home sensor used in the Catcher Assembly
Creased Main Belt
$98.00 USD
This is the primary rolling surface and where our Blackbird pre-rolls are formed, tensioned, and sealed. The estimated/average life span of a single belt is approximately 80-100 hours or 20,000-30,000...
Creased Main Belt - 10 pack
$825.00 USD
This is the primary rolling surface and where our Blackbird pre-rolls are formed, tensioned, and sealed. The estimated/average life span of a single belt is approximately 80-100 hours or 20,000-30,000...
Crutch Pusher Assembly
$120.00 USD
A complete crutch pusher cylinder assembly
Crutch Pusher Clamp Set
$140.00 USD
This clamp is used to secure the Crutch Pusher Cylinder to the base
Crutch Shooter Pogo Assembly
$40.00 USD
This Pogo pin assembly is found within the Crutch Singulator
Crutch Shooter Sensor Assembly
$60.00 USD
The optical sensor used in the crutch shooter assembly.
Crutch Shooter Spring
$2.00 USD
A replacement unit for the springs found on the Crutch Singulator
Cutter Spacer
$1.00 USD
This cutter spacer is used on an older revision of the rotary blade stack. Confirm compatibility before ordering.
Dispenser Air Cylinder Replacement
$80.00 USD
A replacement cylinder used to actuate the Dispenser system
Drive Idler Extension Spring
$10.00 USD
A replacement Extension Spring used in the Paper Feed system
Front Crutch Shooter Assembly
$2,000.00 USD
– Sold OutA complete Front Crutch Shooter assembly. Please confirm Front or Back before order
